Boba Fett Part List

Helmet

Made by animefan on The Dented Helmet. I got the more expensive version that has fiberglass. His helmet was the only one to fit my big head. If you're having troubles getting other helmets to fit or are worried, get an animefan.  

Softparts

Made by Arkady on The Dented Helmet. High quality handmade soft parts using accurate materials. The turnaround time is a few months but it is very worth it.

Jetpack

Made by DVH Props that I found on The Dented Helmet. His pack is great quality. The rocket and thrusters unscrew for transportation and storage. I have his v1 pack, he has since made v2 that is more accurate.

Left Gauntlet

Made by the late RKD (RedKraytDragon) from The Dented Helmet. These are big enough to slip on and off so they don't require the clamshell mechanism. You can however trim them down to make them fit tighter. Greebles also supplied by RKD. In the flame thrower I have a wireless transmitter for a wireless RF servo system made by myself over at Black Tusk Workshop.

Chest Armor

Made by the late RKD (RedKraytDragon) from The Dented Helmet. This armor is fantastic. It's a tad small for my body shape but the accuracy and shape is great. I have the large set. If you can somehow track down a set I recommend it.

Right Gauntlet

Made by the late RKD (RedKraytDragon) from The Dented Helmet. These are big enough to slip on and off so they don't require the clamshell mechanism. You can however trim them down to make them fit tighter. Greebles also supplied by RKD. The hoses are chemical tubes from Lowes and then attached to a parachute clip in the second sleeve of the flight suit.

Ammo Belt

Made by Delta Mike in Poland (RedKraytDragon) from The Dented Helmet. This armor is fantastic. It's a tad small for my body shape but the accuracy and shape is great. I have the large set. If you can somehow track down a set I recommend it.

Girth Belt

Found on Amazon and dyed red then sprayed lightly with black spray paint to give it a weathered look and dull down the red.

Cod and Kidney Plates

Made by the late RKD (RedKraytDragon) from The Dented Helmet. This armor is fantastic. I have the large set. If you can somehow track down a set I recommend it.

Knees

Also made by the late RKD (RedKraytDragon) from The Dented Helmet. I have the large set. If you can somehow track down a set I recommend it. You'll have to dremel out the place for the knee darts. My darts came from Shapeways.

Shin Tools and Boots

Shin Tools came from Man of War Studios (which I will soon upgrade to found parts). They are resin cast.

The boots are also Man of War Studios and are fairly hard to find. The spikes are actual aluminum and I got them second hand so the maker is unknown.

bh51512

My name is Brandon Owens, 501st Member BH/DZ-51512 and MMCC OM#1793. I have an approved Tusken Raider (ANH) and a Boba Fett (ROTJ) that I spend years researching and building. I'm here to share my progress, methods, and findings.